EPFL Hyperloop test track

User avatar
IMB
Posts: 121
Joined: 3. Apr 2021, 16:55

EPFL Hyperloop test track

Unread post by IMB »

EPFL now has its own Hyperloop test track

Source: EPFL Press Release 23.07.2021 © Murielle Gerber/EPFL
https://actu.epfl.ch/news/epfl-now-has- ... est-track/
.
2021-07-23_EFPL_Hyperloop_1
2021-07-23_EFPL_Hyperloop_1
Source: EPFL Press Release 23.07.2021 © Murielle Gerber/EPFL
.
2021-07-23_EFPL_Hyperloop_2
2021-07-23_EFPL_Hyperloop_2
Source: EPFL Press Release 23.07.2021 © Murielle Gerber/EPFL
.
2021-07-23_EFPL_Hyperloop_3
2021-07-23_EFPL_Hyperloop_3
Source: EPFL Press Release 23.07.2021 © Murielle Gerber/EPFL
.
2021-07-23_EFPL_Hyperloop_4
2021-07-23_EFPL_Hyperloop_4
Source: EPFL Press Release 23.07.2021 © Murielle Gerber/EPFL
.
Engineers at EPFL’s DESL lab, working in association with EPFL spin-off Swisspod, have built a Hyperloop test track on the Lausanne campus. They will use the loop – a large vacuum tube for ultra-high-speed travel – to test a linear induction motor. The research is being funded by an Innosuisse grant.

Hyperloops, viewed by some as the fifth mode of transport, stand to revolutionize long-distance travel. They offer a cleaner alternative to planes and are faster than trains. Hyperloop projects are already under way in the Nevada desert, Port of Hamburg, Toulouse, the Near East and China. And yesterday, a team of engineers from EPFL and Swisspod unveiled a circular test track on the Lausanne campus – Europe’s first operational model Hyperloop. It will be used to study new ideas for the loop’s structure and pod and assess its viability for ultra-high-speed mass transportation.

The test track – 40 m in diameter and 120 m long – was developed by EPFL’s Distributed Electrical Systems Laboratory (DESL), headed by Mario Paolone. It’s made out of aluminum alloy and designed to simulate an infinitely long Hyperloop, with pods of various sizes depending on the testing objectives and results. Its performance in terms of the propulsion and levitation system and kinematics will be tested under vacuum at a scale of 1:6. Its numerous high-tech sensors will give engineers key information about their design’s properties. “With this reduced-scale test track, we will be able to study the fundamental aspects of our pod’s electromagnetic propulsion and levitation system,” says Paolone. “We’ll use the results to enhance the pod design and make the loop operate more efficiently.”

With this reduced-scale test track, we will be able to study the fundamental aspects of our pod’s electromagnetic propulsion and levitation system. We’ll use the results to enhance the pod design and make the loop operate more efficiently.
Mario Paolone, head of the EPFL’s Distributed Electrical Systems Laboratory

The pod’s components were produced using DESL’s industrial-scale 3D printer, which can fabricate objects up to 45 cm in size in a range of materials (such as ABS, PLA, PET, nylon, carbon, Flex, polystyrene and Laywood). Special software will be used to replicate the power grid’s behavior in real time, like a digital twin.

Cutting power use with a linear induction motor

One of the big challenges of a Hyperloop is its propulsion system. To keep costs down, the energy required for propulsion in the EPFL design will not come from the track – as it does for Maglev trains – but will be carried by the pods themselves. They will be equipped with linear induction motors, although further development work is needed to reduce the pods’ power consumption. The target is to reach a power consumption of 10–50 Wh/km per passenger (depending on how long the trip is), compared with 97–100 Wh/km for electric cars and 515–600 Wh/km for planes. The development work will be carried out under the LIMITLESS project (for Linear Induction Motor drIve for Traction and LEvitation in Sustainable hyperloop Systems) involving Swisspod, DESL and the Vaud School of Management and Engineering (HEIG-VD), with the support of an Innosuisse grant. Once the low-power linear induction motor is ready, it will be tested on the EPFL track.

“This project provides a great opportunity for Swisspod to join forces with EPFL’s world-class engineering skills,” says Denis Tudor, CEO of Swisspod and a PhD student at EPFL. “By combining those skills with our own business and engineering capabilities, we hope to develop a system that will reach the market in four to five years.” Georgios Sarantakos, who heads up the project at DESL, adds: “Both DESL and Swisspod aim to use innovation as a vector for positive change and develop a feasible transportation system that can bring real value to the local community and deliver significant benefits to society as a whole.”

Source: EPFL Press Release 23.07.2021
https://actu.epfl.ch/news/epfl-now-has- ... est-track/
Best regards,
The IMB Forum Crew
https://www.maglevboard.net/en/

Post Reply